Arches for the spider improved 1.5х1.5 (Polymeric covering)



Buying arcs for a spider is a responsible task, the implementation of which requires maximum caution in the selection process. The modern range of products is extremely wide. It is necessary to select such components that will be not only affordable but at the same time practical and durable. Online store "Sete Tackle" offers to purchase arcs with improved properties due to the polymer coating. To use the arcs, you need a canvas on a fishing spider 1.5x1.5 from fishing line or thread.


 Purpose of polymer coating

Zinc arc coating is a technology for creating an anti-corrosion layer on a steel surface. The advantages of such products over standards: 

  • higher strength;
  • the ability to withstand without any damage the effects of salts on water, ultraviolet rays, adverse temperature conditions;
  • rational price (the coating procedure has a low cost).

Improved spider arcs last three times longer than standard products. Components pay off quickly - in the first months of operation of the gear since they do not need to be changed often. 


Polymer coating technology

A layer of zinc is applied to the steel surface of each spider arc using the thermal method according to the technology developed by the Kharkiv Tank Plant. The result of the procedure is the appearance on the product of a thin invisible film that prevents minimal interaction of the material with external factors that can cause oxidation and other metal deformations. The level of elasticity of steel remains unchanged.

Control over welding and machining with zinc, the arc is carried out by professionals with experience in this field for more than 30 years. Therefore, there is no reason to doubt the quality of the components and their wear resistance. 


Correct installation of arcs

First, you need to find out which end of the arc is the top and which is the bottom. This is not difficult, because the loop is made on the bottom edge. This is necessary for the reliable fastening of the mesh to the support-lift. Thus, the bottom edge of each of the four arcs provided in the design of the spider should be inserted into one of the angles of the stop-lift.

The upper end of the components are included in the cross. The following indicators are proof that the arcs and the cross are selected correctly: The installation of arcs in the common vertex is simple and does not require significant physical effort, but the arcs do not fall and do not protrude from the hole. 


What arcs can be found in our online store?

The specificity of our assortment is that all arcs per spider are sold as part of ready-made sets with crosses. One set is four arcs and one cross. The advantage of such a purchase is that you can be 100% sure that the diameter of the arcs matches the size of the holes in the cross. There are sets with such parameters of arcs, the diameter of which is 0.5 cm:


  • 1x1, where the length of the products is 1.1 m;
  • 1.5x1.5, in which components have a length of 1.4 m;
  • 2x2, where the length of the arcs is 1.8 m.


 When buying components, it should be borne in mind that the parameters 1x1, 1.5x1.5 and 2x2 are the working dimensions that describe not the length of the arcs, but the dimensions of the finished spiders, which are obtained by attaching the components. Accordingly, the net web for equipment should have the parameters 1x1, 1.5x1.5 or 2x2. 


Spider fishing: what should a beginner and a professional remember?

A fishing spider is an equipment that can guarantee a guaranteed catch. With the help of equipment it is convenient to “open the hunt” for large fry and large fish. Accordingly, it is necessary to choose a spider net: the smaller the alleged victim, the smaller the net should be, and vice versa. 

It should be remembered that not all water zones are suitable for spider fishing, but only those in which fish accumulate in large quantities since the peculiarity of this device is mass fishing. It is useful to lower the equipment in spawning grounds, near terrestrial obstructions that impede the movement of fish, in hydraulic structures and in places where mudflows are adjacent to quiet tributaries. 

Note! Before immersing the spider in water, make sure that the bottom is perfectly flat or that there is a slight and almost imperceptible slope in the place chosen by the aquarium. Otherwise, the structure cannot remain in an upright position and fully perform its functions.

The process of fishing with a spider takes place using this technology. Submerged tackle is left underwater for a certain time, after which it is lifted, the prey removed from it and again lowered into the pond. The intervals between diving and lifting should be approximately the same (about 10 minutes on average). To pull a spider out of the water, standing on a pier or bridge, fishermen use ropes, and from the boat or shore, they use the required pole length. By following these tips, you can get a rich catch.


Favorable offer from the company "Sete Tackle"

If you make fishing equipment or plan to repair a fishing spider at home, we suggest you buy accessories from our electronic catalog. For this you do not need to leave your home or office; all you have to do is fill out an application on the website and send it to us. We guarantee:


  • processing of operational orders;
  • quick assembly of goods in accordance with the wishes of the client;
  • organization of delivery to any point of Ukraine by “New Mail” or another transport company (by prior agreement);
  • rational pricing policy, excluding unreasonable margins on products;
  • participation of regular customers in the loyalty program, which allows you to pay with accumulated bonus points;
  • buy spider arcs improved in bulk.

To clarify the wholesale price of components, contact the online store by phone. If necessary, they will provide professional advice and help you choose products that are fully suited to your needs.

Characteristics Материал--- Леска 0.36мм; Размер паука - 1,5х1,5 метра

Write a review

Note: HTML is not translated!

Spider fishing from fishing line 1.5 to 1.5m (Fatka, painter)

  • Brand: Украина
  • Product Code: Паук рыболовный (полотно) из лески 1.5 на 1.5м (Фатка)
  • Availability: In Stock
  • 150.00 грн.

Available Options


Spider fishing from fishing line 1.5 to 1.5m (Fatka, painter)

Spider fishing from fishing line 1.5 to 1.5m (Fatka, painter)

Arches for the spider improved 1.5х1.5 (Polymeric covering)  Buying arcs for a spider is ..

150.00 грн.